SG220 grapple saw

Easy-to-use and lightweight grapplesaw with tilt -
A safe way to remove trees in difficult places

This grapplesaw is suitable for felling and removing of trees and branches, for example, in parks and near power lines etc. It has no need for any extra hydraulics and it requires a low oil torrent. It is also very easy to install.

Properties

  • Fast and easy to use – increases productivity
  • Stable both in felling and loading position
  • Full control over all functions – for example, make the saw movement many times without opening the grapple
  • Works perfectly as a traditional loading grapple
  • Easy to install
  • No additional hydraulic lines are needed – only grapple open and grapple close
  • Completely stepless control – for example, stop the tilt half way if necessary
  • Option: Wireless control (incl. 2 batteries and a battery charger)

    •  

    Can be installed on

  • Trucks
  • Tractors
  • Forwarders
  • Excavators
  • etc.

    •  

    2 standard connection alternatives for grapple control:

  • 2 hydraulic lines (grapple open/close) and electrical wire
  • 2 hydraulic lines (grapple open/close) and wireless control

    •  

    3 claw alternatives:

  • Energygrapple claws (claws with 4 spikes)
  • Claws like a traditional loading grapple
  • A-model claws (claws with diagonal plates) (+300€)

    •  

    Models:

    Mecanil SG220 - 2 hydr. lines (grapple open/close).
    - Cable along the crane.
    - Separate control buttons that can be installed in joystick.
    - Without collecting unit.
    Mecanil SG220 RC-T - 2 hydr. lines (grapple open/close).
    - Radio-control with remote control you hold in your hand.
    - Without collecting unit.
    Mecanil SG220 RC-M - 2 hydr. lines (grapple open/close).
    - Radio-control with separate control buttons that can be installed in joystick.
    - Without collecting unit.
    Mecanil SG220 A - 2 hydr. lines (grapple open/close).
    - Cable along the crane.
    - Separate control buttons that can be installed in joystick.
    - Incl. collecting unit.
    Mecanil SG220 A RC - 2 hydr. lines (grapple open/close).
    - Radio-control with separate control buttons that can be installed in joystick.
    - Incl. collecting unit.

     

    Technical information

    Model SG220 SG220 RC SG220 A SG220 A RC
    Tilt function Yes Yes Yes Yes
    Collecting unit No No Yes Yes
    Grapple size 0,22 m2 0,22 m2 0,22 m2 0,22 m2
    Weight 290 kg 320 kg 360 kg 380 kg
    Rec. working pressure 180-230 bar 180-230 bar 180-230 bar 180-230 bar
    Rec. oil flow rate 40 – 80 l/min. 40 – 80 l/min. 40 – 80 l/min. 40 – 80 l/min.
    Opening of grapple 1200 mm 1200 mm 1200 mm 1200 mm
    Height grapple closed 790 mm 790 mm 1000 mm 1000 mm
    Attachment rotator 173/6 173/6 173/6 173/6
    Control Cable control,
    12V or 24V    		 Radio-control Cable control,
    12V or 24V    		 Radio-control
    Cutting diameter, saw (18″) standard –> 450 mm –> 450 mm –> 450 mm –> 450 mm

    • A logical choice for the future


      We continuously develop our products. We also develop new products according to the needs on the market.

      Contact us, and we´ll make the best solution for You.

    • Financing


      We also offer easy and safe financing.
      Our partners are