Demolition-, Stone- & Universal grabs

TG 15 DG – TG 30 DG
Heavy duty demolition and sorting grab for tilt rotator .
• Double guide bars
• High pressure cylinder with double piston rod seals
• High tensile wear resistant steel (400 HB)
• Extra reinforced body for rigid mounting – Excavator design
• Self lubricating bushings
• Reversible cutting edges
• High tensile wear resistant steel cutting edges
Download pdf
DS Grab 1-4
Heavy duty demolition and sorting grab with low built rotator.
• Double guide bars
• High pressure cylinder with double piston rod seals
• High tensile wear resistant steel (400 HB)
• Extra reinforced body for rigid mounting – Excavator design
• Self lubricating bushings (not DS Grab 1 and 1,5)
• Reversible cutting edges
• High tensile wear resistant steel cutting edges
Download pdf
DS Grab 5-6
Heavy duty demolition and sorting grab with low built rotator.
• Double guide bars
• High pressure cylinder with double piston rod seals
• High tensile wear resistant steel (400 HB)
• Extra reinforced body for rigid mounting – Excavator design
• Self lubricating bushings
• Reversible cutting edges
• High tensile wear resistant steel cutting edges
• Pilot operated check valve
Download pdf
TG 15 MP – TG 20 MP
Heavy duty stone and universal grab for tilt rotator to excavators up to 6 t (TG 15 MP) and 11 t (TG 20 MP)
• Double guide bars
• High pressure cylinder with double piston rod seals
• High tensile wear resistant steel (400 HB)
• Extra reinforced body for rigid mounting – Excavator design
• Self lubricating bushings (not TG 15 and 18 MP)
• Reversible cutting edges
• High tensile wear resistant steel cutting edges (500 HB)
• Pilot operated check valve
Download pdf
U-Grab 1-2
Heavy duty stone and universal grab with low built rotator for excavators up to 6 t (U-Grab 1) or 11 t (U-Grab 2).
• Double guide bars
• High pressure cylinder with double piston rod seals
• High tensile wear resistant steel (400 HB)
• Extra reinforced body for rigid mounting – Excavator design
• Self lubricating bushings (not U-Grab 1 and 1,5)
• Reversible cutting edges
• High tensile wear resistant steel cutting edges (500 HB)
• Pilot operated check valve
Download pdf
TG 25 SR3-SR4
Specially designed heavy duty grapple for forest residue and stone.
• Double guide bars
• Optimized roll in/roll out properties
• High pressure cylinder with double piston rod seals
• High tensile wear resistant steel (400 HB)
• Extra reinforced body for rigid mounting – Excavator design
Download pdf
TG 16 ST
Small heavy duty stone grab for mini excavators.
• Double guide bars
• Optimized roll in/roll out properties
• High tensile wear resistant steel (400 HB)
• Extra reinforced body for rigid mounting – Excavator design
Download pdf
TG 22 ST
Heavy duty stone grab for mini excavators.
• Double guide bars
• Optimized roll in/roll out properties
• High tensile wear resistant steel (400 HB)
• Extra reinforced body for rigid mounting – Excavator design
Download pdf
TG 28 ST – 42 ST
Strong heavy duty stone grabs for excavators and backhoe loaders
• Double guide bars
• High pressure cylinder with double piston rod seals
• High tensile wear resistant steel (400 HB)
• Extra reinforced body for rigid mounting – Excavator design
• High tensile wear resistant steel cutting edges (500 HB)
Download pdf
TG 15 MP – TG 20 MP
Heavy duty stone and universal grab for tilt rotator to excavators up to 6 t (TG 15 MP) and 11 t (TG 20 MP)
• Double guide bars
• High pressure cylinder with double piston rod seals
• High tensile wear resistant steel (400 HB)
• Extra reinforced body for rigid mounting – Excavator design
• Self lubricating bushings (not TG 15 and 18 MP)
• Reversible cutting edges
• High tensile wear resistant steel cutting edges (500 HB)
• Pilot operated check valve
Download pdf
U-Grab 1-2
Heavy duty stone and universal grab with low built rotator for excavators up to 6 t (U-Grab 1) or 11 t (U-Grab 2).
• Double guide bars
• High pressure cylinder with double piston rod seals
• High tensile wear resistant steel (400 HB)
• Extra reinforced body for rigid mounting – Excavator design
• Self lubricating bushings (not U-Grab 1 and 1,5)
• Reversible cutting edges
• High tensile wear resistant steel cutting edges (500 HB)
• Pilot operated check valve
Download pdf
TG 12 UG-7
Small universal grab for small grapple loaders and mini excavators.
Also available with weld-on cutting edge or with welded + bolted cutting edges.

• Double guide bars
• Optimized roll in/roll out properties
• High tensile wear resistant steel (400 HB)
Download pdf
TG 22 UG-9
Very strong and compact heavy duty universal grab for both crane and excavator.
Also available with weld-on cutting edge or with welded + bolted cutting edges.

• Double guide bars
• Optimized roll in/roll out properties
• High pressure cylinder with double piston rod seals
• High tensile wear resistant steel (400 HB)
• Extra reinforced body for rigid mounting – excavator design
Download pdf
TG 28 UG-11
Very strong and compact heavy duty universal grab for both crane and excavator.
Also available with weld-on cutting edge or with welded + bolted cutting edges.

• Double guide bars
• Optimized roll in/roll out properties
• High pressure cylinder with double piston rod seals
• High tensile wear resistant steel (400 HB)
• Extra reinforced body for rigid mounting – excavator design
Download pdf
GX 28-50
Virtually indestructable heavy duty universal grab for forest residue, stumps, stone, metal scrap etc.
• Double guide bars
• Optimized roll in/roll out properties
• High pressure cylinder with double piston rod seals
• High tensile wear resistant steel (400 HB)
• Extra reinforced body for rigid mounting – excavator design
Download pdf
GX 28-50-1000
 
Wider version of the GX 28-50 (Width 1000 mm).

Virtually indestructable heavy duty universal grab for forest residue, stumps, stone, metal scrap etc.
• Double guide bars
• Optimized roll in/roll out properties
• High pressure cylinder with double piston rod seals
• High tensile wear resistant steel (400 HB)
• Extra reinforced body for rigid mounting – excavator design

 
TG 36 UG-13
Heavy duty universal grab for excavators and stationary loaders.
Also available with weld-on cutting edge or with welded + bolted cutting edges.

• Double guide bars
• Optimized roll in/roll out properties
• High pressure cylinder with double piston rod seals
• High tensile wear resistant steel (400 HB)
• Extra reinforced body for rigid mounting – excavator design
Download pdf
GX 36-50
Virtually indestructable heavy duty universal grab for forest residue, stumps, stone, metal scrap etc.
• Double guide bars
• Optimized roll in/roll out properties
• High pressure cylinder with double piston rod seals
• High tensile wear resistant steel (400 HB)
• Extra reinforced body for rigid mounting – excavator design
Download pdf
GX 45-50
 
Virtually indestructable heavy duty universal grab for forest residue, stumps, stone, metal scrap etc.
• Double guide bars
• Optimized roll in/roll out properties
• High pressure cylinder with double piston rod seals
• High tensile wear resistant steel (400 HB)
• Extra reinforced body for rigid mounting – excavator design
 
TG 55 UG-11
Heavy duty universal grab for excavators.
• Double guide bars
• Optimized roll in/roll out properties
• High pressure cylinder with double piston rod seals
• High tensile wear resistant steel (400 HB)
• Extra reinforced body for rigid mounting – excavator design
Download pdf
GX 55-50
Very large universal grab for forest residue, stumps, stone, metal scrap etc.
 
TG 15 MP – TG 20 MP
Heavy duty stone and universal grab for tilt rotator to excavators up to 6 t (TG 15 MP) and 11 t (TG 20 MP)
• Double guide bars
• High pressure cylinder with double piston rod seals
• High tensile wear resistant steel (400 HB)
• Extra reinforced body for rigid mounting – Excavator design
• Self lubricating bushings (not TG 15 and 18 MP)
• Reversible cutting edges
• High tensile wear resistant steel cutting edges (500 HB)
• Pilot operated check valve
Download pdf
U-Grab 1-2
Heavy duty stone and universal grab with low built rotator for excavators up to 6 t (U-Grab 1) or 11 t (U-Grab 2).
• Double guide bars
• High pressure cylinder with double piston rod seals
• High tensile wear resistant steel (400 HB)
• Extra reinforced body for rigid mounting – Excavator design
• Self lubricating bushings (not U-Grab 1 and 1,5)
• Reversible cutting edges
• High tensile wear resistant steel cutting edges (500 HB)
• Pilot operated check valve
Download pdf

  • A logical choice for the future


    We continuously develop our products. We also develop new products according to the needs on the market.

    Contact us, and we´ll make the best solution for You.

  • Financing


    We also offer easy and safe financing.
    Our partners are