SG280 grapple saw

Grapple saw with tilt function -
for installation on trucks, forest machines, excavators etc.

This grapple saw works the same way as the popular smaller grapple saw SG220.
It is a grapple saw that is suitable for felling and removing of trees and branches, for example, in parks and near power lines etc. The grapple saw also works perfectly on forest machines and excavators. It has no need for any extra hydraulics and it requires a low oil torrent. It is also very easy to install.

SG280-featured

Features

  • Fast and easy to use – increases productivity
  • Stable both in felling and loading position
  • Full control over all functions – for example, make the saw movement many times without opening the grapple.
  • Works perfectly as a traditional loading grapple
  • Easy to install
  • No additional hydraulic lines are needed – only grapple open and grapple close
  • Completely stepless control – for example, stop the tilt half way if necessary
  • Option: Radio-control (incl. 2 batteries and a battery charger)
  •  

    Can be installed on

  • Trucks
  • Tractors
  • Forwarders
  • Excavators
  • etc.
  •  

    2 standard connection alternatives for grapple control:

  • 2 hydraulic lines (grapple open/close) and electrical wire
  • 2 hydraulic lines (grapple open/close) and radio-control
  •  

    3 claw alternatives:

  • Energygrapple claws (claws with 4 spikes)
  • Claws like a traditional loading grapple
  • A-model claws (claws with diagonal plates) (+300€)
  •  

    Models:

    Mecanil SG280 - 2 hydr. lines (grapple open/close).
    - Cable along the crane.
    - Separate control buttons that can be installed in joystick.
    - Without collecting unit.
    Mecanil SG280 RC-T - 2 hydr. lines (grapple open/close).
    - Radio-control with remote control you hold in your hand.
    - Without collecting unit.
    Mecanil SG280 RC-M - 2 hydr. lines (grapple open/close).
    - Radio-control with separate control buttons that can be installed in joystick.
    - Without collecting unit.
    Mecanil SG280 A - 2 hydr. lines (grapple open/close).
    - Cable along the crane.
    - Separate control buttons that can be installed in joystick.
    - Incl. collecting unit.
    Mecanil SG280 A RC - 2 hydr. lines (grapple open/close).
    - Radio-control with separate control buttons that can be installed in joystick.
    - Incl. collecting unit.

     

    Technical information

    Model SG280 SG280 RC SG280 A SG280 A RC
    Tilt function Yes Yes Yes Yes
    Collecting unit No No Yes Yes
    Grapple size 0,30 m2 0,30 m2 0,30 m2 0,30 m2
    Weight 335 kg 370 kg 410 kg 440 kg
    Rec. working pressure 180-230 bar 180-230 bar 180-230 bar 180-230 bar
    Oil flow rate 50 – 100 l/min. 50 – 100 l/min. 50 – 100 l/min. 50 – 100 l/min.
    Rec. oil flow rate 60 – 100 l/min. 60 – 100 l/min. 60 – 100 l/min. 60 – 100 l/min.
    Opening of grapple 1540 mm 1540 mm 1540 mm 1540 mm
    Attachment rotator 173/6 173/6 173/6 173/6
    Control Cable control,
    12V or 24V
    Radio-control Cable control,
    12V or 24V
    Radio-control
    Cutting diameter, saw (22″) standard –> 550 mm –> 550 mm –> 550 mm –> 550 mm
    Cutting diameter, saw (25″) –> 630 mm –> 630 mm –> 630 mm –> 630 mm
    • A logical choice for the future


      We continuously develop our products. We also develop new products according to the needs on the market.

      Contact us, and we´ll make the best solution for You.

    • Financing


      We also offer easy and safe financing.
      Our partners are