SG160 grapple saw

Lightweight grapple saw with tilt -
for installation on forest trailers with crane, tractors, small forwarders etc.

This small and lightweight grapple saw, with a weight from only 190 kg, works the same way as the popular bigger grapple saws SG220 and SG280.
Suitable for felling of energy wood and removing of trees and branches for example in parks etc. This grapple saw has no need for any extra hydraulics and it works with a low oil flow rate. It is also very easy to install.

SG160-featured

Features

  • Fast and easy to use – increases productivity
  • Stable both in felling and loading position
  • Full control over all functions – for example, make the saw movement many times without opening the grapple.
  • Works perfectly as a traditional loading grapple
  • Easy to install
  • No additional hydraulic lines are needed – only grapple open and grapple close
  • Completely stepless control – for example, stop the tilt half way if necessary
  • Option: Radio-control (incl. 2 batteries and a battery charger)
  •  

    Can be installed on

  • Forest trailers with crane
  • Tractors
  • Small forwarders
  • Trucks etc.
  •  

    2 standard connection alternatives for grapple control:

  • 2 hydraulic lines (grapple open/close) and electrical wire
  • 2 hydraulic lines (grapple open/close) and radio-control
  •  

    3 claw alternatives:

  • Energygrapple claws (claws with 4 spikes)
  • Claws like a traditional loading grapple
  •  

    Models:

    Mecanil SG160 - 2 hydr. lines (grapple open/close).
    - Cable along the crane.
    - Separate control buttons that can be installed in joystick.
    - Without collecting unit.
    Mecanil SG160 RC-T - 2 hydr. lines (grapple open/close).
    - Radio-control with remote control you hold in your hand.
    - Without collecting unit.
    Mecanil SG160 RC-M - 2 hydr. lines (grapple open/close).
    - Radio-control with separate control buttons that can be installed in joystick.
    - Without collecting unit.
    Mecanil SG160 A - 2 hydr. lines (grapple open/close).
    - Cable along the crane.
    - Separate control buttons that can be installed in joystick.
    - Incl. collecting unit.
    Mecanil SG160 A RC - 2 hydr. lines (grapple open/close).
    - Radio-control with separate control buttons that can be installed in joystick.
    - Incl. collecting unit.

     

    Technical information

    Model SG160 SG160 RC SG160 A SG160 A RC
    Tilt function Yes Yes Yes Yes
    Collecting unit No No Yes Yes
    Grapple size 0,16 m2 0,16 m2 0,16 m2 0,16 m2
    Weight 190 kg 205 kg 220 kg 235 kg
    Rec. working pressure 180-230 bar 180-230 bar 180-230 bar 180-230 bar
    Rec. oil flow rate 40 – 80 l/min. 40 – 80 l/min. 40 – 80 l/min. 40 – 80 l/min.
    Opening of grapple 925 mm 925 mm 925 mm 925 mm
    Attachment rotator 59/30 59/30 59/30 59/30
    Control Cable control,
    12V or 24V
    Radio control Cable control,
    12V or 24V
    Radio control
    Cutting diameter, saw (16″) –> 350 mm –> 350 mm –> 350 mm –> 350 mm
    • A logical choice for the future


      We continuously develop our products. We also develop new products according to the needs on the market.

      Contact us, and we´ll make the best solution for You.

    • Financing


      We also offer easy and safe financing.
      Our partners are