EG250 energy wood head (knives)

Efficient and light energy wood felling head with cutting knife

This is one of the most versatile energygrapples there is on the market. This grapple is an efficient combination of a felling head for energy- and small wood and a traditional loading grapple. The head is suitable for all kinds of clearing and thinning operations as well as felling, collecting, handling and loading of trees and bushes etc. Excellent for clearing bushes and twigs, for example in field margins and roadsides. The grapple is especially developed considering simple and easy construction and little torrent of oil. The grapple has a patented cutting knife which demands a small space and which manage cutting of thick trunks fast.


  • Fast and easy to use – increases productivity
  • Stable both in felling and loading position
  • Full control over all functions – for example, make the cutting movement many times without opening the grapple
  • Works perfectly as a traditional loading grapple
  • Easy to install
  • No additional hydraulic lines are needed – only pressure and tank
  • Completely stepless control – for example, stop the tilt half way if necessary
  • Can easily cut trees without harming trees nearby
  • Can cut a bigger bundle of smaller trees and bushes with one cut
  • Option: Self-powered wireless control (no change of battery required)

    Self-powered wireless remote control

    The patented remote control does not require any change of battery, because it is self-powered. The battery is charged when the felling head is in use.
    The installation of the felling head is also easier and more efficient, when no electrical wires has to be installed on the crane.

    Can be installed on

  • Tractors
  • Forwarders
  • Harvesters
  • Excavators
  • etc.

    2 standard connection alternatives for grapple control:

  • 2 hydraulic lines (pressure – tank) and electrical wire
  • 2 hydraulic lines (pressure – tank) and self-powered wireless control

    3 claw alternatives:

  • Energygrapple claws (claws with 4 spikes)
  • Claws like a traditional loading grapple
  • A-model claws (claws with diagonal plates) (+300€)


  • Mecanil EG250 – Without accumulation, cable control
  • Mecanil EG250 A – With accumulation, cable control
  • Mecanil EG250 A RC – With accumulation, self-powered wireless control
  • Mecanil EG250 – Ask for more information on other combinations.

    Technical information

    Model EG250 EG250 A
    Accumulation No Yes
    Weight (from) 360 kg 410 kg
    Working pressure 200 – 230 bar 200 – 230 bar
    Rec. oil flow rate 40 – 80 l/min. 40 – 80 l/min.
    Opening of grapple about 1450 mm about 1450 mm
    Electrical system 12 V or 24 V 12 V or 24 V
    Attachment rotator 173/6 173/6
    Cutting diameter, knife –> 250 mm –> 250 mm
    • A logical choice for the future

      We continuously develop our products. We also develop new products according to the needs on the market.

      Contact us, and we´ll make the best solution for You.

    • Financing

      We also offer easy and safe financing.
      Our partners are